Evaporating Coating Equipment
Evaporating Coating Equipment
Product Description
Electrical control
Main circuit: Contactor, Thermal resistorIntermediate relay
Control systemManual or automatic control with PLC touching screen.
Test vacuum with vacuum gauge.
(4) Protection system: flow controller, pressure controller, and
electrical interlocking protection
Evaporating Coating Equipment-ZLS-1800
Main technical principles:
(1) Ultimate vacuum: 3-5*10-3 Pa
(2) Power supply: Three-phase four-wire380v50Hz; Power: 75kw
(3) Cooling water: Pressure0.2MPa Temperature20
Water consumption: 1.5T/h
Compressed air pressure : 0.5MPa0.6MPa
Vacuum chamber
Chamber size: 1800mm (Diameter)*2000mm (Height). Vertical single chamber and double door which all was made of carbon steel. The outer chamber body is painted while inner was steel coating.
Evaporation Source: Using Tungsten filaments to heating (according to your requirement)
Pumping system
One set of H-150 Slide-valve pump
One set of ZJP-1800 Roots vacuum pump
One set of 2X-30ARotary Vane Vacuum Pump
One set of KL-630 Diffusion pump convex cavity
One set of Water-cooling device
Vacuum valves
H-630 Big valve(1 set)
H-200 Vacuum pneumatic valve(2 set) Compound Vacuum Gauge(1 set)
If you need any more details of the above news and/or products, please visit Chinatungsten Online, or contact us directly.
Disclaimer: The article is only reflecting the opinions of the author. We have no responsibility to prove the originality and authenticity of the content, words and/or pictures. You readers should just take it as reference and check the details by yourselves. And the content is not a suggestion for investment decision. The investor takes his or her own risks if he or she operates accordingly. If you have any dissent about the contents above, please contact the relevant author, or the webmaster. We will try our best to assist the dealing of the related issues. Thanks for your visit and cooperation.
|
